Dynacord DL 94B Speaker System User Manual


 
Technische Informationen
Architects and engineers
specications
DL 94B
Ceiling
Speaker System
BESCHREIBUNG
Der Deckeneinbaulautsprecher DL 94 B ist mit einem 5“-
Breitbandchassis sowie einem 100 V-Übertrager bestückt.
Der Lautsprecher ist als zweiteiliges System mit Innen- und
Außenring ausgeführt. Ring und Abdeckgitter sind komplett aus
Metall gefertigt und verfügen über ein Schnellmontage-Bajonett-
System mit drei Haltefedern für einen dauerhaften, festen Sitz
in der Decke. Der elektrische Anschluss des 100 V-Übertragers
für die Anpassung auf volle, halbe und viertel Leistung
erfolgt gemäß dem British Standard 5839, Teil 8 über eine
Keramikklemme und Thermosicherung. Zusätzlichen Schutz
bietet der im Lieferumfang enthaltene Feuertopf.
DESCRIPTION
The ceiling speaker DL 94 B is equipped with a 5-inch full
range chassis as well as a 100 V transformer. The speaker is
performed as a two-piece system with outer and inner ring. Ring
and front grille are completely manufactured from metal and
equipped with a quick mount bayonet system with three springs
for durable stability of the ceiling speaker. Reliable connection
at full, half and quarter output power is established through a
ceramic clamp, thermo fuse and 100 V transformer due to the
British Standard 5839, part 8. A re dome included in delivery
provides additional option.
Specications
Order No. D121877
Nominal impedance 1667 Ω / 100 V
Continous power handling 6 W
Matching 6 / 3 / 1.5 / 0.75 / 0.25W
SPL 1 W / 1 m 89 dB
Max. SPL 97 dB
Frequency range 100…17500 Hz
Dimensions (A x B) Ø 190 x 98 mm
Mounting hole 180 mm
Weight 1.11 kg
Colour white (RAL 9016)
fire dome
Ø 190
98
Ø 190
ABMESSUNGEN / DIMENSIONS
Installation Notes
When installing the loudspeaker network and the loudspeaker, make
sure that the requirements of VDE 0100 and the respective parts are
observed. All connection points must be free of tensile stress.
IMPORTANT:
Open wire ends must be isolated - danger of short circuit!
Installationshinweise
Bei der Installation des Lautsprechernetzes und des Lautsprechers ist
darauf zu achten, daß die Anforderungen der VDE 0100 und dessen
zutreffende Teile eingehalten werden. Alle Anschlußpunkte müssen frei
von Zugbeanspruchung sein.
ACHTUNG:
Freibleibende Drahtenden müssen isoliert werden, sonst Kurzschluß-
gefahr!
USA Telex Communications Inc., 12000 Portland Ave. South, Burnsville, MN 55337, Phone: +1 952-884-4051, FAX: +1 952-884-0043
Germany EVI AUDIO GmbH, Hirschberger Ring 45, D 94315, Straubing, Germany Phone: 49 9421-706 0, FAX: 49 9421-706 265
Subject to change without prior notice. Printed in Germany 04/08/2006
www.dynacord.de