Filter
Top Products
Rev: 10242000
2
• Power supply cords should be routed so that they are not likely to be
walked on or pinched by items placed upon or against them, pay
particular attention to cords at plugs, convenience receptacles, and the
point where they exit from the DMP-CD100.
• Never remove the enclosure. If the internal parts are touched accidentally,
a serious electric shock might occur.
• If an abnormal smell or smoke is detected, immediately turn the power
OFF and pull out the power cord. Contact your dealer or nearest service
center.
• Avoid placing the DMP-CD100 under direct sunlight or near a source of
heat such as heating equipment. Particularly, never leave it in an
automobile or on the dashboard.
• The DMP-CD100 may not function properly if used at extremely low, or
freezing temperatures. The ideal ambient temperature is above +5°C
(41°F).
• Avoid places where it is dusty or where the humidity is high.
• Avoid placing the DMP-CD100 on an unstable surface such as a shelf or
in a place subject to vibrations.
• Keep the DMP-CD100 away from sources of magnetic fields such as TV
sets, speaker systems, radios, motorized toys or magnetized object.
• Do not use volatile solvents such as alcohol, paint thinner, gasoline, or
benzene, etc. To clean the cabinet, use a clean dry cloth.
• The user should not attempt to service the DMP-CD100 beyond that
described in the operating instructions. All other servicing should be
referred to qualified service personnel.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.