Filter
Top Products
Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting
Zone Setup
Make settings for audio playback in a multi-
zone system.
F Menu tree F
Manual Setup
Zone Setup
a ZONE2
s ZONE3
a
ZONE2
Make settings for audio playback in a ZONE2 system.
s
ZONE3
Make settings for audio playback in a ZONE3 system.
Bass
Adjust low frequency range (bass).
[Variable range] –10dB
~
0dB
~
+10dB
Treble
Adjust high frequency range (treble).
[Variable range] –10dB
~
0dB
~
+10dB
HPF
When using speakers that cannot satisfactorily play low frequencies,
distortion of the bass sound can be reduced by setting “HPF” to
“ON”.
[Selectable items] ON
OFF
Lch Level
Adjust the left channel output level.
[Variable range] –12dB
~
0dB
~
+12dB
Rch Level
Adjust the right channel output level.
[Variable range] –12dB
~
0dB
~
+12dB
Channel
Switch between stereo and mono output.
[Selectable items]
Stereo
Mono
When GUI menu “Manual Setup” – “Option Setup” – “Amp Assign”
(vpage 33) is set to “ZONE (MONO)”, the “Channel” setting is
automatically set to “Mono”.
Volume Level
Adjust the main volume level.
[Selectable items] Variable
–40dB
0dB
“Variable” is displayed when a power amplifi er is assigned to the
ZONE2 output channel at GUI menu “Manual Setup” – “Option Setup”
– “Amp Assign”.
Volume Limit
Make a setting for maximum volume.
[Selectable items] OFF
–20dB
–10dB
0dB
Power On Level
Defi ne the volume setting that is active when the power is turned on.
[Selectable items] Last
– – –
–70dB ~ +18dB
Mute Level
Set the amount of attenuation when muting is on.
[Selectable items] Full
–40dB
–20dB
Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting
Option Setup
Make various other settings.
F Menu tree F
Manual Setup
Option Setup
a Amp Assign
s Volume Control
d Source Delete
f GUI
g Quick Select Name
h Trigger Out 1
j Trigger Out 2
k Remote ID
l 2Way Remote
A0 Dimmer
A1 Setup Lock
A2 Maintenance Mode
A3 Firmware Update
A4 Add New Feature
The places where the surround back amplifi er are used can be set
freely according to the usage environment. This makes it possible to
output sound to rooms other than the room (the main zone) where
surround playback is performed (multi-zone playback) or play the sound
with high quality using the front speakers (bi-amp connections).
a
Amp Assign
Defi ne how the amplifi er for the surround back speaker
channels is used.
For details, see “Amp Assign / Multi Zone Connections and Operations”
(vpage 68, 69).
[Selectable items]
7.1CH
ZONE2
ZONE3
ZONE(MONO)
Bi-Amp
2CH
Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting
1.AVR3808CIEU_103.indd 36 2008/02/12 9:14:20