Denon AVR-2312CI Stereo Receiver User Manual


  Open as PDF
of 152
 
68
n HDMI control function (vpage68)
n Sleep timer function (vpage69)
n Adjusting the volume of the speakers
(vpage70)
n Quick select function (vpage71)
n REC OUT mode (vpage72)
n AirPlay (vpage73)
n Party mode function (vpage74)
n Zone Management function (vpage75)
n Operating a media controller to play music and still
pictures (vpage76)
n Web control function (vpage77)
n Various memory functions (vpage78)
Playback (Basic operation) (vpage26)
Settings (vpage19)
Selecting a listening mode (SURROUND MODE)
(vpage52)
Playback (Advanced operation)
Convenient functions
HDMI control function
If you connect the unit and an HDMI control function compatible TV or
player with an HDMI cable and then enable the HDMI control function
setting on each device, the devices will be able to control each other.
nOperations possible by HDMI control
•This unit power off can be linked to the TV power off step.
•You can switch audio output devices with a TV operation.
When you set “Output audio from amp” in the TV audio output
setup operation, you can switch the amp power on.
•You can adjust this unit volume in the TV volume adjustment
operation.
•You can switch this unit input sources through linkage to TV
input switching.
•When playing the player, this unit input source switches to the
source for that player.
•If you switch the input source of the unit to “TV”, you can
play TV audio with this unit (vpage7 “About ARC (Audio
Return Channel) function”).
•When “HDMI Control” – “Control” (vpage106) in the menu
is set to “ON”, signals input to the HDMI input connector are
output to the television or other device connected to the HDMI
output connector, even if the power of this unit is in standby
(pass-through function).
•To play the audio of a TV that does not support the ARC function
with the unit, connect the TV with an optical digital connection.
•To use the pass-through function, connect an HDMI connection
device that is compatible with HDMI control.
nSetting procedure
1
Set the HDMI output connector corresponding with
the HDMI control function.
Set “HDMI Control” – “Control” (vpage106) to “ON“.
2
Turn the power on for all the devices connected by
HDMI cable.
3
Set the HDMI control function for all devices
connected by HDMI cable.
•Please consult the operating instructions for the connected devices
to check the settings.
•Carry out steps 2 and 3 should any of the devices be unplugged.
4
Switch the television input to the HDMI input
connected to this unit.
5
Switch this unit input to the HDMI input source and
check if the picture from the player is ok.
6
When you turn the TV’s power to standby, check
that the power of this unit also goes to standby.
If the HDMI control function does not operate properly, check the
following points.
•Is the TV or player compatible with the HDMI control function?
•Is “HDMI Control” – “Control” (vpage106) set to “ON”?
•Is “Power Off Control” (vpage106) set to “All” or “Video”?
•Are the HDMI control function settings of all devices correct?
Basic version
Advanced version
Information
Advanced version
vSee overleaf
BD
 previous next