Filter
Top Products
28
Q: How do you make CD’s for the CP-100 PRO?
A: The simplest way is to use the Datavideo VDR-3000 as a recorder for your
already produced video tracks. Just record your tracks one after the other and
you’re done.
Of course you may use a computer with a CD burner and software that creates
Video CD’s.
If you don’t own a VDR-3000 they are available for rental or purchase from
Datavideo or through many of our dealers.
Q: How does all of this compare to making and using DVD’s in a display
situation?
A:
CP-100 PRO DVD’s
Media Cost Less than 50 cents More than 50 cents
Production Cost Video production, no
programming
Video production and
programming
Levels of
programming
Just the switches –up
to nineteen tracks
multiple
Creative
opportunity
Display and the
program and just
buttons.
Program only. The
display
needs a sophisticated
control panel or a touch
screen.
Remote Control Simple, inexpensive Not simple,
not inexpensive
Q: How do I turn off/on the (OSD) On Screen Display?
A: Via the hand held remote. The CP-100 PRO has a set up memory. You will
need the remote to turn it on again.
Q: Must I use Datavideo’s VDR-3000 when making CD-s for the CP-100 PRO?
A: No…But here are three good reasons why you should consider using it.
(1) The VDR-3000 is a stand alone system that automatically encodes
incoming video and burns a CD without tying up your computer or risking
system failures if you chose to do something else (like check your e-mail) with
an internal CD burner.
(2) Every CD made on the VDR-3000 includes an auto run file that will let it
play back on your pc, without having to manually turn on the Microsoft
viewers.
(3) The CD-DVD format is easily available on the VDR-3000. This format is
equal to the average compression rate of a DVD.
Q & A