Curtis RCD858 CD Player User Manual


 
LOADING DISCS
LOADING AND UNLOADING COMPACT DISCS
Set the FUNCTION Selector to the CD position.
Open the disc compartment.
Once the CD cover has opened, remove a disc from its case and place it carefully in
one of the indentations in the compartment with the label side facing up. Smaller, 3”
discs, may also be used with this CD player.
To load additional CD's press the DISC button to rotate the CD tray. Up to 3 discs
can be placed in the tray at any one time. Smaller 3 inch discs can be used in this
unit.
Close the disc compartment.
The unit will go through a cycle to find the first CD there is in the tray. This may take
up to 15 seconds.
The disc compartment may be opened at any time.
CAUTION
Do not put anything except a compact disc into the compartment. Foreign objects
can damage the mechanism.
Do not force the compartment by hand during the opening and closing operations.
Keep the disc compartment closed when not in use to prevent dirt and dust from
entering the mechanism.
SUPER BASS
To enhance Bass effect to the desired level using the Bass Control Button.
PLAYING DISCS
Open the disc compartment, and load a CD.
Close the disc compartment and the unit will search for the first tray to contain a CD
and the display will show the total playing time of the CD.
Press the CD DISC Button to select the CD of your choice.
Press the PLAY/PAUSE Button and disc play will begin from the beginning of the
first track.
A particular track can be selected by pressing the & Buttons. If this is done
before pressing the PLAY/PAUSE Button, disc play will start with the selected track
when the PLAY/PAUSE Button is pressed.
At the end of the disc, the unit will switch to stop mode
Discs should be returned to their cases after use. This avoids serious scratches that
could cause the Laser pickup to skip.
Do not expose discs to direct sunlight, high humidity, or high temperatures for extended
periods. Long exposure to high temperatures can warp the disc.
- 8 -