Creative 1820M CD Player User Manual


 
4 - The PatchMix DSP Mixer
Mixer Strip Creation
E-MU Digital Audio System 35
f See “Pre or Post Fader
Aux Sends” on page 45.
4. Select Pre-Fader Aux Sends or leave the box unchecked for Post-Fader Aux Sends.
5. Click OK to create a new strip or Cancel to cancel the operation.
To Delete a Mixer Strip:
1. Click the top of the mixer strip you wish to delete. A red border appears around the
strip, indicating that it is selected.
2. Click on the Delete Mixer Strip button, or right-click and choose Delete, or use the
Delete key on the PC keyboard. See Overview of the Mixer
Multichannel WAVE Files
2 channels of WAVE recording and 8 channels of multichannel WAVE playback are
supported. The WAVE channels are available for the following types of WDM devices:
Classic MME
DirectSound
Direct WDM / Kernel Streaming (KS)
DirectSound and the WDM/KS interfaces allow up to Eight channels of Wave Out
while the classic MME interface only exposes 2 channels.
The WAVE channels operate at all sample rates. For additional information about WDM
behavior at high sample rates, see WDM Recording and Playback Behavior”.
192kHz/96kHz DVD-Audio disks are protected against digital copying. However, most
DVD-Audio disks contain duplicate 48kHz audio tracks which will play back on the
Digital Audio System.
Windows Media Player/DVD/Surround Sound Playback
Select DirectSound as the output format when using Windows Media Player and other
DVD player applications.
Eight channel WAVE playback supports 5.1, 6.1 or 7.1 surround audio.
The chart below shows how to connect the outputs for surround sound playback. Use
outputs 1-3 for 5.1 surround; use outputs 1-4 for 7.1 surround.
Multichannel WAVE to Surround Sound Speaker Channels
(using the 5.1 DVD Playback Session)
WAVE Strip Surround Channels 1/4” Outputs 1/8” Outputs
E-DSP WAVE 1/2 Front Left / Front Right 1L = FL 1R = FR 1 (Tip = FL Ring = FR)
E-DSP WAVE 3/4 Center / Subwoofer 3L = C 3R = Sub 3 (Tip = C Ring = Sub)
E-DSP WAVE 5/6 Rear Left / Rear Right 2L = RL 2R = RR 2 (Tip = RL Ring = RR)
E-DSP WAVE 7/8 Side Left / Side Right 4L =SL 4R = SR 4 (Tip = SL Ring = SR)