Compaq 800 Speaker User Manual


 
5–28 Maintenance and Service Guide
Removal and Replacement Procedures
3. Remove the following TM2.5 × 7.0 screws (Figure 5-22):
Four screws along the notebook front edge 1
Two screws on each side of the hard drive bay 2
Three screws on the rear edge of the notebook 3
One screw in the memory expansion compartment 4
One screw near the fan vent 5
Figure 5-22. Removing the Top Cover Screws
307503-002.book Page 28 Thursday, January 30, 2003 1:04 PM