Filter
Top Products
44 VXZ766
English
9. OPERATIONS OF ACCESSORIES
CD Changer Operations
CD changer functions
When an optional CD changer is connected
through the CeNET cable, this unit controls all
CD changer functions. This unit can control a
total of 2 changers.
1. Press the [SRC] button and select the CD
changer mode to start play.
2. If 2 CD changers are connected, press the
[SRC] button to select the CD changer for
play.
•If “NO MAG” appears in the display, insert the
magazine into the CD changer. “DISC CHK”
appears in the display while the player loads
(checks) the magazine.
•If “NO DISC” appears in the display, eject the
magazine and insert discs into each slot. Then,
reinsert the magazine back into the CD changer.
Note:
• Some CDs recorded in CD-R/CD-RW mode may
not be usable.
!
CAUTION
CD-ROM discs cannot be played from every
CD changer, it’s depended on the model.
Pausing play
1. Press the [ ] button to pause play.
“PAUSE” appears in the display.
2. To resume play, press the [ ] button
again.
Displaying CD titles
This unit can display title data for CD-text CDs
and user titles input with this unit.
zWhen connected to CDC655Tz or
DCZ625
1. Each time you press the [TITLE] button, the
title changes in the following order:
User title (disc) ➜ CD-text title (disc) ➜
Artist name ➜ CD-text title (track) ➜ User
title (disc)…
Notes:
• If the CD playing is not a CD-text CD or no user
title has been input, “NO TITLE” appears in the
display.
• If a CD-text CD is not input its disc title or a track
title, “NO TITLE” appears in the display.
Procedure to scroll a title
Set “AUTO SCROL” to “ON” or “OFF”.
(The factory default setting is “ON”. Refer to the
subsection “Setting the method for title
scroll” (P. 41) in section “Common
Operations”.)
zWhen set to “ON”
The title is automatically kept scrolling.
zWhen set to “OFF”
To scroll just 1 time when the title was changed
or you press and hold the [TITLE] button for 1
second or longer.
Selecting a CD
1. Press the [UP] or [DN] button to select the
desired disc.
• If a CD is not loaded in a slot of magazine,
pressing the [UP] or [DN] button can not work.
• Pressing the [BND] button also advances to next
disc.
Skipping a track
zTrack-up
1. Move the [ ] / [ ] lever up to move ahead
to the beginning of the next track.
zTrack-down
1. Move the [ ] / [ ] lever down to move
back to the beginning of the current track.
2. Move the lever down again within about 2
seconds to move to the beginning of the
previous track.
Fast-forward/fast-rewind
zFast-forward
1. Move the [ ] / [ ] lever up for 1 second or
longer.
zFast-rewind
1. Move the [ ] / [ ] lever down for 1
second or longer.
VXZ766.book Page 44 Monday, January 16, 2006 6:43 PM