Filter
Top Products
OPERATIONS
36 VXZ766
English
Turning on/off speakers
You can turn on/off or select the size of front
speakers, a center speaker, surround speakers,
and a subwoofer depending on your speaker
system.
1. Following the steps 1 to 3 in “Selecting the
monitor menu”, select “SPEAKER-SEL”
from “AUDIO SETUP”.
2. Press the “ ” button to display the
SPEAKER-SEL screen.
Each time you press “ ” or “ ” buttons,
the setting item changes as following order:
3. Press the “ ” button to go to the option list
and press “ ” or “ ” buttons to select the
setting.
You can select the settings as shown in the
following table.
Asterisk (∗) indicates the factory default setting.
4. Press the [ENT] button.
5. Repeat steps 2 to 4 to turn on/off each
speaker.
Adjusting the speaker gain
• The factory default setting is “0 dB”.
1. Following the steps 1 to 3 in “Selecting the
monitor menu”, select “SP-GAIN” from
“AUDIO SETUP”.
FRONT-SP
CENTER-SP
SRD-SP
SUB-WOOFER
AUDIO SETUP
DELAY >
SP-GAIN >
SPEAKER-SEL >
PRESS RIGHT TO SELECT
DRC OFF
Dolby PL ON
SPEAKER-SEL
CENTER-SP SMALL
PRESS RIGHT TO SELECT
SRD-SP LARGE
SUB-WOOFER ON
FRONT -SP SMALL
FRONT-SP
(Front speaker)
LARGE
SMALL ∗
CENTER-SP
(Center speaker)
SMALL ∗
OFF
SRD-SP
(Surround speaker)
LARGE ∗
SMALL
OFF
SUB-WOOFER
(Subwoofer)
ON ∗
OFF
AUDIO SETUP
DELAY >
SP-GAIN >
SPEAKER-SEL >
PRESS RIGHT TO SELECT
DRC OFF
Dolby PL ON
VXZ766.book Page 36 Monday, January 16, 2006 6:43 PM