Filter
Top Products
VB475 33
En
g
lish
• Do not use a three-cable speaker system and do not connect the speakers to the
vehicle’s body. The player uses BTL circuitry, which requires that each speaker be
connected using insulated cables.
• Install the speaker cables and power amplifi ers approximately 12 inches (30cm)
away from the antenna and any antenna extended parts.
Correct speaker wiring
Left +
Left -
Right +
Right -
White
White/black
Gray
Gray/black
Left and right wiring diagram
Incorrect speaker wiring
Left +
Left -
Right +
Right -
Left +
Left -
Right +
Right -
Left +
Left -
Right +
Right -
Wiring examples
Outlet power amplifi er connection
CAUTION
Connect the amplifi er carefully using the following diagram.
Incorrectly connecting the amplifi er may impact the quality of
the audio and could damage the speakers.
• When the player is on, it outputs a control signal through the blue and white lead.
Connect this lead to an external power amp’s system remote control or to the
vehicle’s auto-antenna relay control terminal (max. 300mA 12 VCD). If the vehicle
features a glass antenna, connect to the antenna booster power supply terminal.
• When using an external power amp, do not connect the blue and white lead to the
amp’s power terminal. Likewise, do not connect the blue and white lead to the power
terminal of the auto-antenna. This connection could cause excessive current drain
and the player to malfunction.
VB475OwnersManual.indd 33VB475OwnersManual.indd 33 1/27/2007 9:34:40 PM1/27/2007 9:34:40 PM