Filter
Top Products
12 VB475
English
The player briefl y displays, “Bye Bye!” and enters its “standby” state. The player never
turns off completely. If the clock display is enabled (the default), the player displays the
current time prefaced by “AM” or “PM.”
Setting the time
In standby, you can set the time on the clock.
1. If the player is on, press the power button (
) to turn it off (go into standby mode).
2. Press and hold the D button on the player.
The system displays the current time setting.
3. To switch between setting the hours and minutes, press the button again.
3. Press the next button (
)to increase the hours or minutes.
4. Press the previous button (
) to decrease the hours or minutes.
NOTE
After fi ve seconds of inactivity, the player exits time setup mode.
Protecting the player from theft
To discourage theft, detach the front panel, store it in the protective case provided, and
take it with you.
Removing the front panel
1. Press the open button (
) in the upper left corner of the player to open the front
panel.
Open button
Left side of the player
CAUTION
Do not grip the front panel buttons or use force to remove and
install the front panel.
2. Holding the right side of the front panel, push the panel to the left to release the
right pivot hinge.
VB475OwnersManual.indd 12VB475OwnersManual.indd 12 1/27/2007 9:34:27 PM1/27/2007 9:34:27 PM