28 AXZ610
English
Digital Radio / DAB Operations
INFO (Announcement)
In INFO standby mode, when the selected
announcement programme starts, the main unit
switches to the selected announcement pro-
gramme automatically.
● Setting INFO standby mode
If you press and hold ISR button 9 for 1 second
or longer, “INFO” lights in the display and the main
unit is set into INFO standby mode until the se-
lected announcement is broadcast. When the
selected announcement broadcast starts, the
announcement item appears in the display. If you
press and hold ISR button 9 for 1 second or
longer while the selected announcement broad-
cast is being received, the selected announce-
ment broadcast reception is cancelled and the
main unit goes into INFO standby mode.
● Cancelling INFO standby mode
To cancel INFO standby mode, press and hold
ISR button 9 for 1 second or longer.
● Information select
This is a function for selecting INFORMATION
ON or OFF in Information interrupt mode.
You can set ON up to 6 information items.
You can select any of the 6 items below:
1. Perform the following operation depending on
the connected model.
Press and hold
ADJ button 2
for 1 second or
longer.
2. Press the right or left SEARCH button % to
select “INFO SEL”, then push ENT button #
to enter “INFO SEL” mode.
3. Press the right or left SEARCH button % to
select an information item. You can select any
of 6 items:
4. Perform the following operation depending on
the connected model.
Turn the Rotary knob $ clockwise or
counterclock wise to set the information item
for ON or OFF.
5. Press ADJ button 2 to return to the previous
display.
Switching the PTY and INFO display
language
You can select one of 2 languages (English or
French) for the PTY and INFO shown in the dis-
play.
∗ The factory default setting is “English”.
TA (Traffic Announcement)
In TA standby mode, when a traffic announcement
broadcast starts, the traffic announcement broad-
cast is received as top priority regardless of the
function mode so you can listen to it. Traffic
programme (TP) automatic tuning is also possible.
∗ This function can only be used when “TP” is lit in
the display. When “TP” is lit, this means that the
RDS broadcast station being received has traffic
announcement programmes.
● Setting TA standby mode
If you press ISR button 9 when only “TP” is lit in the
display, “TP” and “TA” light in the display and the unit
is set into TA standby mode until a traffic announce-
ment is broadcast. When a traffic announcement
broadcast starts, “TRA INFO” appears in the display.
If you press ISR button 9 while a traffic announce-
ment broadcast is being received, the traffic announce-
ment broadcast reception is cancelled and the unit
goes into TA standby mode.
● Cancelling TA standby mode
With “TP” and “TA” lit in the display, press ISR
button 9. The “TA” in the display goes off and
TA standby mode is cancelled.
∗ If “TP” is not lit, pressing ISR button 9 searches
for a TP station.
● Searching for a TP station
When “TP” is not lit, if you press ISR button 9,
“TA” in the display lights and the unit automati-
cally receives a TP station.
Note:
• I
f a TP station is not received, the unit continues the
search operation. Pressing ISR button
9
again goes
off “TA ” in the display and stops TP station searching.
INFORMATION item
ENGLISH Contents
TRAVEL TRANSPORT FLASH
WARNING WARNING / SERVICE
NEWS NEWS FLASH
WEATHER AREA WEATHER FLASH
EVENT EVENT ANNOUNCEMENT
SPECIAL SPECIAL EVENT