Filter
Top Products
26 AXZ610
English
Digital Radio /
DAB Operations
Note: Be sure to read this chapter referring to the front
diagrams of chapter “3.CONTROLS” on page 5
(unfold).
DAB control function
When a CeNET cable is used to connect a DAB
(sold separetely), all functions can be operated.
Listening to the DAB station
1. Press FNC button 3 to select DAB mode.
2.
When the unit receives a DAB station, the
display changes in the following order:
Frequency channel ➜ service label
Switching displays
Press the DISP button 0 for 1 second during
the Main (service label) display to select Main
(service label) or Sub (PTY).
Note:
• The display shown in the normal reception mode
and the preset reception mode is the same when
a DAB station is received.
3. When the unit does not receive a DAB sta-
tion,
the display changes in the following or-
der:
–Normal reception mode–
–Preset reception mode–
Notes:
• The number of programmes and broadcasting
times depend on the DAB stations.
• When the strength of DAB signals is weak, audio
output is muted.
Selecting a P.EQ menu
1. Press A-M button @ and select “P.EQ”. “P.EQ”
blinks in the display.
2. Press BND button ! to select “BASC” (ba-
sic). “BASC” is displayed in the function mode
indication 0 in the display.
3. Press one of Direct buttons 8 and select the
desired P.EQ menu.
∗ To select the user memory, press BND button
! to select “USR” and press one of Direct but-
tons 8.
Editing/storing a P.EQ menu (User
memory)
1. Select a P.EQ menu which you want to edit
on the basis of.
2. Press and hold ADJ button 2 for 1 second or
longer.
3. Press the right or left side of SEARCH button
% to select the item to be adjusted.
There are correction channel, correction band,
selection of the centre frequency, gain adjust-
ment and selection of the Q-curve available
for the items to be adjusted.
∗
For details on each adjustment item, refer to the
owner’s manual supplied with the DPH910.
4. Turn the Rotary knob $ clockwise or counter-
clockwise to make the adjustment.
5. Repeat steps 3 to 4 to complete the adjust-
ment and press ADJ button 2.
6. Press and hold one of Direct buttons 8 for 2
seconds or longer to store the edited contents.
∗ You can give a title to the user memory. For the
inputting method of titles, refer to the subsec-
tion “Entering titles” in section “Operations
common to each mode”.
AC Processor Operations