Filter
Top Products
87
Connection of Phono Terminal And Plug
I n s t a l l a t i o n
1
Connect the output to inputs of amplifier or mixer.
3
Insert the headshell into the front part of the tone-arm. Turn thr
LOCK RING to the directoin of the arrow shown the fig until
fixing the headshell.
4
Adjustment of Overhang
As shown in the illustration, overhang indicates the distance
from the stylus to end of headhshell. Please set the distance to
50mm. If the overhang adjustment is not properly made, the
stylus will not be able to trace the record grooves correctly.
Be share not to touch stylus during adjustment
with finger.
N O T E
Be sure to connect firmly the GND terminal to
the amplifier or mixer, or a power source HUM
will result.
N O T E
Do not place the unit where it is exposed to direct sun light,
high temperature of humidity to prevent possible troubles.
Place the unit in a stable and horizontal position, where there is
little or no vibration.
Locate the unit as far away from the speakers as possible and
isolate the unit from sound radiation from them.
If the unit is placed too close to the radio, interference to
AM/FM reception may result
INSTALLATION AND CONNECTION
ILLUSTRATION OF CONNECTION