Chief Manufacturing side shelf for the steel elite converta rack Stereo System User Manual


 
Installation Instructions ECR-ST-SIDE
3
INSTALLATION
NOTE: The ECR-ST-SIDE shelf is designed for use with Chief
Raxxess ECR equipment racks.
1. Open the ECR top and remove two Phillips screws from
inside the ECR rack. (See Figure 1)
2. Remove the ECR outer side panel. (See Figure 1)
Figure 1
3. Lower side shelf assembly (A) into bottom tabs on ECR
equipment rack. (See Figure 2)
4. Attach side shelf assembly using two 08-32 x 3/8" Phillips flat
head screws (C) inserted from inside ECR. (See Figure 2)
5. Attach folding shelf assembly (B) above side shelf assembly
using four 08-32 x 1/2" Phillips head screws (D) inserted
from inside ECR, and four 08-32 nuts (E). (See FIgure 3)
Figure 2
Figure 3
1
x 2
2
Front of ECR
(A)
4
(C) x 2
3
3
ECR front
(B)
(A)
(E) x 4
5
(D) x 4