Cary Audio Design CD 303T SACD CD Player User Manual

WARNING: The triangle with the lightning flash symbol displayed on the unit advises the user of dangerous
uninsulated voltage inside the product’s enclosure.
CAUTION: To reduce the risk of electric shock, do not remove the cover. There are no user-serviceable parts
inside; it is recommended that only qualified personnel service this component.
ALERT: The triangle with the exclamation point symbol on the component suggests that the owner refer to
important operating and maintenance instructions in the owner’s manual.
1. OWNER’S MANUAL: Before powering up the equipment, read all safety and operating instructions and
follow them as instructed. Retain the safety and operating instructions for future reference.
2. ATTACHMENTS: Use only those attachments recommended by the unit manufacturer, as others may
cause hazards.
3. ACCESSORIES: Do not place the unit on an unstable cart, stand, tripod, bracket, or table. The unit may
fall, causing injury to a person or damage to the unit. Mount the unit according to the manufacturer’s
instructions with the suggested mounting accessory.
4. WALL OR CEILING MOUNTING: Mount the unit to a wall or ceiling only in the manner recommended
by the manufacturer.
5. WATER AND MOISTURE: Do not use the unit near water (for example, near a swimming pool, bath tub,
wash bowl, kitchen sink, or laundry tub) or in a damp environment (like a basement or outside in the rain).
6. OBJECT AND LIQUID ENTRY: Do not push objects of any kind into the unit through openings as they
could touch dangerous voltage points and short-out parts, possibly resulting in a fire or electric shock. Avoid
spilling liquid of any kind on the unit. If water or any metal object (such as a paper clip, coin, or staple)
accidentally falls inside the unit, disconnect it from the AC power source immediately and contact Cary
Audio Design for further instructions.
7. HEAT: Position the unit away from heat sources such as radiators, heat registers, stoves, or other units
(including amplifiers) that produce heat.
8. VENTILATION: Slots and openings in the cabinet create ventilation to protect the component from
overheating. These openings on the top and bottom panels must remain unobstructed. Allow at least 6 inches
(16cm) of clearance above the unit and an opening behind the unit for airflow. Do not place the unit on a
bed, sofa, rug, built-in bookcase, or rack without adequate ventilation.
9. GROUNDING OR POLARIZATION: As a safety feature, the unit may be equipped with a polarized
alternating current line plug in which one blade is wider than the other. This plug will fit into the power
outlet only one way. If you cannot insert the plug fully into the outlet, try reversing the plug. If the plug still
will not fit, contact a licensed electrician to update your obsolete outlet. Do not defeat the safety purpose of
the polarized plug.
10. POWER SOURCES: Operate the unit only from the power source indicated on the marking label. If you
are unsure of the type of power supplied to your home, consult your unit dealer or local power company.
11. POWER CORD PROTECTION: Arrange power supply cords so that they do not suffer from foot traffic
or pinching by items placed on or against them. Pay close attention to cords where plug enter the AC outlet
and where they exit from the unit.
12. LIGHTNING: For added protection during a lightning storm or when is the component is idle for long
periods of time, unplug the unit from the wall outlet and disconnect the antenna or cable system. This will
help protect the unit from lightning and power line surge damage.
13. POWER LINES: Do not locate an outside antenna system in the vicinity of overhead power lines or other
electric light or power circuits. When installing an outside antenna system, take extreme care to avoid
touching the power lines or circuits; contact with them could be fatal.
14. OVERLOADING: Do not overload wall outlets, extension cords, or integral convenience receptacles as
this increases the risk of fire or electric shock.