Cary Audio Design CD 303T SACD CD Player User Manual

Unplug the unit from the wall outlet. Clean the cabinet housing and front panel of the CD
303T SACD Professional Version with a soft cloth and a glass cleaner (such as Windex).
Removing the cover during cleaning is not advised. The frequency of cleaning will vary
based on the cleanliness of the environment and the number of hours the CD 303T SACD
Professional Version is operated.
The CD 303T SACD Professional Version has four 12AU7 tubes for audio gain and
output buffering. They should provide years of trouble free performance. You may want
to experiment by “rolling” some vintage 12AU7 tubes in the CD 303T SACD
Professional Version. You can access the four tubes by opening the small panel on the
top of the chassis. Be sure the unit is unplugged and cool before opening the top panel
and removing any tubes. Gently pull the tubes out by pulling straight up. When inserting
tubes, be careful to line the pins of the tube with the socket in the CD 303T SACD
Professional Version.
Careful consideration has been given to the design of your CD 303T SACD Professional
Version to keep maintenance problems to a minimum. Any problems or requests for
service should be referred to our Customer Service Department at 919.355.0010. Do not
return the CD 303T SACD Professional Version to the factory without a return
authorization number (RA) from the Customer Service Department. Refer to the next
section for details about returning equipment to Cary Audio Design.
Should the unit be lost or damaged in shipment, Cary Audio Design will assume no
responsibility if the shipping company refuses to pay for damage due to your improper
packing or lack of insurance. Please use the original shipping carton for shipping the
Cary Audio Design will provide repair service for its products charging on a time and
expense basis. Please call Cary Audio Design at 919.355.0010 for more information
about out-of-warranty service and repair fees.