Cary Audio Design CD-500 CD Player User Manual


 
WELCOME
UNPACKING AND INSTALLATION
Unpacking
Your Cary Audio Design product was shipped in a carton particularly designed to protect its
contents, and special care has been taken to prevent damage during shipping.
Carefully remove your new component from its packing carton and examine it closely for signs of
shipping damage. If shipping damage is discovered, document the damage with photographs,
contact the transport carrier immediately, and retain the packing as evidence.
We strongly recommend saving all original packing cartons to protect your component for
storage or future shipping.
Power Requirement
The CD-500 is designed to operate from AC mains current. The specified AC voltage is either
110-120 volts or 220-240 volts AC at 50-60 Hz.
Connections
Digital Outputs: These outputs send a digital signal and should be connected only to the
appropriate digital input of an accompanying component.
Analog Outputs: These are for connection to the CD or AUX input jacks of an
accompanying preamplifier or amplifier.
Warranty Card
If you are the original purchaser of this unit and you purchased it in the United States, fill out the
enclosed warranty registration card and return it to Cary Audio Design within 15 days of your
purchase. Warranty restrictions apply. Consult the warranty section of this manual for details.
Please keep a copy of the original sales receipt from your Authorized Cary Audio Design dealer to
validate the warranty if necessary.
5