Cary Audio Design Audio CD Player CD Player User Manual


 
Rear Panel
10
9
11
12
13
POWER INPUT(AC IN):
* Connect to an AC power supply using the included power supply cord.
RS 232 JACK
DIGITAL INPUT JACK ( AES/EBU):
* 44.1kHz -192kHz digital data is input to this jack.
DIGITAL INPUT JACK ( COAXIAL):
* 44.1kHz -192kHz digital data is input to this jack.
DIGITAL INPUT JACK ( TOSLINK):
* 44.1kHz -192kHz digital data is input to this jack.
*
The pin assignments of ALL of the XLR-type male analog outputs,
the XLR-type male digital output and XLR-type female digital inputs are:
Pin 1: Signal ground
Pin 2: Signal + (non-inverting)
Pin 3: Signal - (inverting)
Connector ground lug: chassis ground
Pin 1: Signal ground
Pin 2: Signal + (non-inverting)
Pin 3: Signal - (inverting)
Connector ground lug: chassis ground
Pin 1: Signal ground
Pin 2: Signal + (non-inverting)
Pin 3: Signal - (inverting)
Connector ground lug: chassis ground
1
1
2
2
3
3
Refer to your amplifier's operating manual to verify that the XLR pin
assignments of its input connectors correspond to the CD 306 SACD.
If they are different, wire the XLR cable so that the appropriate XLR
output pin connects to the equivalent XLR input pin.
Refer to your digital source's operating manual to verify that the XLR
pin assignments of its input connectors correspond to the CD 306 SACD.
If they are different, wire the XLR cable so that the appropriate output
pin connects to the equivalent output pin.
Refer to your digital input source signal player or other digital source's
operating manual to verify that the XLR pin assignments of its input
connectors correspond to the CD 306 SACD. If they are different, wire
the XLR cable so that the appropriate input pin connects to the equivalent
input pin.
1
2
3