Filter
Top Products
FRONT
LEFT
6
The Satellite Desktop Stands
L
The Center Channel Stands
K
Install a Satellite Desktop Stand by
inserting it into the “T”-shaped
socket in the back of each satellite,
feeding the cable through the
stand’s cut-out (see Diagram K) .
Apply the five self adhesive feet
to the base of the Desktop Stands
(see Diagram L). The feet prevent a
satellite from sliding across the
desktop should it be inadvertently
bumped or jostled.
Note: If you wish to install the
rear Satellites in the Floor Stands,
do not apply the self adhesive feet
to the base of their Desktop Stands.
The stands for the center channel
speaker are installed by inserting
the strut of the stand into the
recess in the back of the Center
Channel speaker (see Diagram L1).
If using the Center Desktop
Stand, apply the provided self-
adhesive feet to its bottom surface.
The feet prevent a satellite speaker
from sliding across the desktop
should it be inadvertently bumped
or jostled.
Use the provided hook and
loop fasteners to adhere the
Monitor Stand to the top surface
of the monitor (see Diagram L2).
L1
L2
Apply feet only to
Center Desktop stand