Cambridge Audio CD30 CD Player User Manual


 
15
CD30
ENGLISH
Troubleshooting
There is no power
Ensure the AC power cord is connected securely.
Ensure the plug is fully inserted into the wall socket and is switched on.
Check the unit is switched on at the rear panel.
Check fuse in the mains plug or adaptor.
The player will not read the disc
Check the disc is not loaded upside down.
Check that the disc is not too scratched or dirty.
There is no sound
Ensure that the amplifier is set correctly.
Check that the interconnects are inserted correctly.
The disc is skipping
Check that the disc is not too scratched or dirty.
Ensure the player is on a firm surface and not subject to vibrations.
There is a hum coming from the speaker
Ensure that all cable connections are secure.
The remote handset will not function
Check that the batteries have not expired.
Ensure that nothing is blocking the remote sensor.
Check that the correct source is selected on the remote control i.e. CD30.
In the event that the above solutions do not remedy your problem, please consult
our frequently asked questions (FAQ) section on our website:
www.cambridge-audio.com/sts/faqs
You can also use this facility to post a question to our Technical Support team.
For all servicing, in or out of warranty, please contact your dealer.
Disc types CD (CD-DA), CD-R/RW
D/A Converter Wolfson Microelectronics
WM8716 24-Bit/192kHz capable
Frequency response 20Hz - 20kHz (+/-0.5dB)
THD <0.003% @ 1Khz 0dBFs
<0.005% 20Hz-20Khz 0dBFs
Linearity +/- 1dB @ -90dBFs
Stopband rejection (>24kHz) >90dB
S/N ratio >90dB
Total correlated jitter <300pS
Crosstalk @1kHz <-100dB Crosstalk @20kHz
<-80dB
Output impedance <50ohms
Power Supply All versions 100-240V AC ~ 50/60Hz
Max. power consumption 7W
Standby power consumption <5W
Dimensions 270 x 67 x 285mm (WxHxD)
Weight 2.3kg (5.0lbs)
Technical specifications