Cambridge Audio CD30 CD Player User Manual


 
12
The disc tray can be opened at any time by pressing the Stop/Ejectbutton. If the disc
is playing, press Stop/Eject first to stop playback and then press again to eject the
disc. Only remove the disc after the tray has fully opened.
Note:
- Do not put anything except a Compact Disc into the tray, foreign objects may damage
the mechanism.
- Do not force the tray by hand during the opening and closing operations.
- To avoid dirt and dust entering the mechanism, keep the disc tray closed.
- If the Compact Disc is seriously scratched or too dirty the player may not be able to
read it or play it.
- Never load more than one disc into the disc tray at one time.
Normal disc play
This unit has been designed to play compact discs, recordable CDs
(CD-R) and re-writable CDs (CD-RW) bearing the identification logo
shown here. No other discs can be used. Any CD-R/CD-RW discs
should contain properly recorded TOC (Table of Contents) information so that they can
be played back. This unit can play only the discs recorded in the CD-DA format
designed for music reproduction. Do not attempt to play a disc containing other data,
such as a CD-ROM for PCs with mp3 or WMA files, on this unit.
4. Switch on your amplifier and set its input selector to the correct position. Adjust the
volume control to a desired level.
5. To begin playback, press Play/Pause. After a short pause, playback will begin.
When the last track has finished playing, the display will return to Table of Contents
(TOC).
6. To stop the disc at any point, press the Stop/Ejectbutton. Pressing the Play/Pause
button while the disc is playing will pause the disc and the track time will flash on
the display. Playback can be resumed by pressing Play/Pause again.
Locating a specific track during playback
1. A single short press of the button will take you to the beginning of the next track
on the CD. Repeat as necessary.
2. A single short press of the button will take you to the beginning of the current
track and two short presses of the will take you to the beginning of the previous
track. Repeat as necessary.
Locating a specific track when playback is stopped
1. A single short press of the   buttons will skip between tracks.
2. Press and hold the   button to scroll rapidly through tracks.
3. Press Play/Pause to start playback from the selected track.
Operating instructions (continued)