Califone 2455AV-02 CD Player User Manual


 
7
Visit us online at califone.com
Getting Started continued
Getting Started continued
• To Pause press the ‘PLAY/PAUSE’ button while the disc is playing, the playing time will ash.
Pressing the ‘PLAY/PAUSE’ button again will start the disc again from where it paused.
• To select a track to play press the ‘SKIP FORWARD uu| ’ or ‘SKIP BACK |tt’ button either from ‘Stop’
or ‘Pause’. Each press will change the track number by one.
If the CD is playing, pushing and holding the ‘SKIP uu|’ button will advance through the current track
until it is over, then proceed to advance through the next track as long as the button is held down.
Conversely, pushing and holding the ‘SKIP |tt’ button will scan in the reverse direction through the
track currently playing and continue through previous tracks as long as the button is held down.
• To stop playing the disc, press the ‘STOP’ button.
Repeat Playing
• To repeat one track, press the ‘REPEAT’ button one time either while playing or in pause.
• To replay all tracks, press the ‘REPEAT’ button a second time either while playing or in pause.
• A third press of the ‘REPEAT’ button will cancel the repeat command.
Memory Programming. Up to 20 tracks can be programmed.
With the CD stopped press the ‘PROGRAM’ button one time. Select a track to play by pushing the ‘Skip
Forward’ uu| or ‘Skip Back’ |tt button. Push the ‘PROGRAM’ button again to enter another track to save in
memory. When nished, press the ‘PLAY/PAUSE’ button to start the program. Pressing ‘STOP’ at any time
exits the Program function. Note: When the CD door is opened all programming is cleared.
One Track Repeat (Flashing)
4:05
Track
5
Repeat
Program Input Mode
Pr:01
Track
_ _
Memory
Choose Track 4
Pr:01
Track
04
Memory
Program Input Complete
Pr:01
TrackMemory
_ _