Calibre UK VANTAGE-HD Home Theater System User Manual


 
Issue 1.0.2 28 March 2006 © Calibre UK Ltd Page 5 of 30
Picture 1 Select Display Device Type
9
Select display
device
resolution
Choose the correct display resolution by scrolling down to the Resolution menu
item and pressing OK to display the list of available modes. Note the scroll bar at
the left of the list - it is too long to display the full list on screen so you must
scroll up and down it to see all modes.
For best performance it is critical that you select a mode which is equal to
the native resolution of the display device you are using, provided that the
display supports its native mode. This is to ensure that the internal
scaling within your display device is not operating.
Depending on the mode you choose, Vantage-HD may have to re-boot to
change resolution. If this occurs you need to re-enter the Output menu by
pressing Menu, scrolling to Output Menu with the up/down keys and
entering the Output Menu with the right key