Filter
Top Products
Issue 1.0.2 28 March 2006 © Calibre UK Ltd Page 23 of 30
INPUT SIGNAL DETAILS
11.1. Introduction
This section provides technical details for all possible inputs please refer to the model
specification to determine which inputs can be displayed by your Vantage-HD.
11.2. Video Inputs
Composite via RCA jacks
S-Video via 4-way mini DIN socket
Signal formats Composite (CVBS), S-Video (Y/C), Standards
NTSC, PAL, SECAM
Composite (CVBS) input level 1V p-p nominal inc. sync
Luminance (Y) input level 1V p-p nominal inc. sync
Chrominance (C) input level 0.6V p-p nominal
Input Impedance (all inputs) 75 Ohms
11.3. Component Video Input
Via 3 or 5 RCA jacks
YPbPr, YPbPrS, RGB and RGB(S) component video
Signal formats 484i and 576i (SD), 480p, 576p (ED), 720p, 1080i at 50, 59.94 and 60Hz
and 1080p at 24, 25 and 30Hz.
Please note this input does not support Computer SVGA signals which should be
connected via the Computer SVGA input
11.4. SDI Input (optional)
Format: SD-SDI and HD-SDI YCbCr 4:2:2 serial digital component video
Input impedance: 75 ohms.
SMPTE 292M and SMPTE 259M-C compliant
11.5. HDMI Input
HDMI format 1.1 with HDCP
Signal formats
484i and 576i (SD), 480p, 576p (ED), 720p, 1080i at 50, 59.94 and 60Hz and 1080p at
24, 25 and 30Hz
1080p at 50 and 60Hz
11.6. Computer (SVGA) Inputs
Signal formats: DOS 720 x 400 70Hz
VGA 640 x 480 60Hz to 75Hz inclusive
SVGA 800 x 600 56Hz to 75Hz inclusive
XGA 1024 x 768 60Hz to 75Hz inclusive
WXGA 1280 x 768 60Hz to 75Hz inclusive
SXGA 1280 x 1024 60Hz
RGB video level 0.7V - 1.0V
RGB input impedance 75 Ohms
Sync formats
1. Separate H & V sync at TTL levels.