Filter
Top Products
Issue 1.0.2 28 March 2006 © Calibre UK Ltd Page 19 of 30
CONFIGURATION MENU
9.1. Introduction
The Configuration Menu allows the user to customize the "look and feel" of the Vantage-HD user
interface
Language
Allows selection of the language for the OSD, current options are
English (American) - default
English (British)
Francais
Deutsch
Menu Colors
Allows selection
of the color scheme for the OSD, options are
Blue - default
Gray
Green
Transparent Menu
Allows the displayed image to be viewed through the OSD menu by
making the OSD semi-transparent. Default is off
3-D Effect
Changes the menu borders between flat (default) and 3-D effect
HDMI Audio Input
Allows the HDMI operation mode to be changed between Repeater
and Receiver.
When configured as a Repeater, the HDMI capabilities of your
attached display device are relayed through Vantage-HD to your
HDMI source equipment.
When configured as a Receiver, the HDMI capabilities seen by your
source equipment are fixed by Vantage-HD and do not relate directly
to the capabilities of your attached display device.
If using audio from the HDMI output of Vantage-HD together with
HDMI audio from your source equipment, you should always select
Repeater, otherwise the audio signal presented to your display device
may not be compatible with it.
If using HDMI audio inputs to Vantage-HD from your source
equipment, but using the Coaxial or Optical audio outputs from
Vantage-HD, you should always select Receiver, otherwise multi-
channel audio may not be available from the Coaxial or Optical audio
outputs.
If you find that the HDMI behavior of your source or display
equipment is erratic or not as expected, try changing the HDMI mode
since some display devices and some source equipment do not
correctly support Repeater mode.
IMPORTANT:
i) Before changing from Receiver to Repeater mode, make sure your
display device is connected and turned on.
ii) Before changing from Receiver to Repeater, or from Repeater to
Receiver, we recommend that you disconnect or power down any
connected HDMI source equipment.
Note: Use of analog audio outputs with HDMI audio inputs is not