Filter
Top Products
Issue 1.0.2 28 March 2006 © Calibre UK Ltd Page 12 of 30
SELECTING AN INPUT
5.1. Via the OSD
Now you can choose from the input channels you have defined by scrolling up to the Input
Selection menu. Here you will find listed those input channels you have defined. Press the
right navi-key to enter the Input Selection menu, then scroll to the input you wish to view or
whose configuration you wish to alter. Press OK to select it.
5.2. Via the Front Panel
Alternatively you can step through the defined input channels when the OSD is not displayed
by using the Input key on the front panel of Vantage-HD.
5.3. Via the Numeric Buttons on the Remote
You can also direct-select an input channel by its number in the Input Selection listing, using
the numeric keys on the remote control.
It is also possible to change the allocated numbers for those input channels in the Input
Selection list. To do this scroll to that channel type with the up/down navi-keys, then press
OK. Scroll to the Input Number, then press OK. Select an alternative number from the list.
Note the order of the list does not change on the OSD.
Input Selection Menu