Filter
Top Products
5
Connect TVee
Next you need to get an input signal into the TVee soundbar. All it takes is the audio connection cable that is supplied. There
are two likely sources for a signal—your television or a cable television connection box. (The control box for a satellite system
is for this purpose the same as a cable box. For simplicity we’ll call it a cable box, but it could be either one.)
The main advantage of getting the signal from the cable box is that it is easier to set up. But if you have multiple signal
sources, such as a DVD player, in addition to the cable signal you might need to get the signal from the TV so you can enjoy
the TVee sound with all of your media.
The bass unit receives a wireless audio signal from the soundbar—you just need to plug it into your AC outlet.
Fire Up TVee!
Now the fun starts. Connect the power supply to the soundbar, turn on its power switch and the one on the bass unit.
Turn on the other components in your system and tune in a familiar channel. You should hear sound from TVee. If you don’t,
try turning up the volume of TVee using its volume control buttons.
If TVee is connected to the television try adjusting the volume using the television remote control. If the volume level
changes it shows that TVee is connected to a “variable” output. The mute control of the television remote should also work.
That makes things easy. You can ignore the “Control TVee” section on the following page.
If the TVee is connected to the television it is likely that the television speakers are also playing. Most modern televisions have
a way of turning o the internal speakers. There are hundred of models of televisions from dozens on manufacturers so it is
impossible to give speci c instructions on how to do that. But most use a similar procedure.
Look on the remote control for your television for a “menu” or “setup” button. Press it and you’ll see an on-screen menu. Look for
an option to control audio functions and select it. This is where you’ll probably nd the setting to turn o the internal speakers.
If you cannot turn o the internal speakers it is not a problem. TVee will tremendously enhance the sound of the television
speakers with extended response and improved de nition. However, to get the most from TVee you’ll want it to be louder
than the television. Use the following steps to adjust the volume balance:
1 Teach TVee to respond to the volume up and down control commands of your television remote. (See the “Control TVee”
section for information on how to do that.)
2 Turn down the volume of the television all the way using the control buttons on the set.
3 Use the volume control buttons on soundbar to set the volume of TVee to a normal listening level.
Television
COMPONENT
INPUT
L
AUDIO
R
Y
P
B
PR
COMPOSITE
INPUT
ANTENNA
L
AUDIO
R
VIDEO
AUDIO
OUTPUT
L
R
Cable or Satellite Box
COMPONENT
OUTPUT
Y
P
B
PR
COMPOSITE
OUTPUT
CABLE
INPUT
VIDEO
AUDIO
OUTPUT
L
R
Audio connection cable
Soundbar connection panel
Power supply cord