Filter
Top Products
6. In the DTS Settings section, choose the Bit Rate, Output type, and Dialog
Normalization
factor. (See step 4 on page 13 for explanation.)
3dB rear channel attenuation is display-only here. This parameter is set in
the Packer. (See step 5 on page 8 for explanation.)
Bit Rate and Output type fields are automatically determined by the sample
rate of the source material.
For 44.1 kHz and 88.2 kHz source files, only one bit rate (1234800) and
output type (.wav) are possible.
With 48 kHz source files for DVD encoding,
Bit rate is selectable: 1509750
bits (1.5 Mbps) or 754500 (754 kbps).
With 48 kHz source files,
Output Type is also selectable:
■
DTS wave format .wav (Intel byte order, wav header)
■
DTS padded format .dts (raw file, no wave header, Motorola format, and zero
padding to fill frames)
■
DTS compacted format .cpt (Motorola byte order, zero padding is removed,
timecode is removed but a start time is present)
Dialog Normalization: see definition on page 13 under step 4.
3 dB rear channel attenuation is display-only here. This parameter is set in
the Packer. (See step 5 on page 8 for explanation.)
Matrix ES channels and Phase Shift for ES encoding, see step 4, page 13.
For more information, see the topic
DVD Authoring for DTS on page 20.
DTS Pro Series Surround Encoder – Installation and User Manual
16