Bose Multi-CD Changer CD Player User Manual


 
14
Care and Maintenance
Français Español English
Troubleshooting
Problem What to do
No system operation
Check the power connections between the Wave
®
music system and the changer. Refer
to “Connecting the Multi-CD Changer to your Wave
®
music system” on page 6.
Make sure you ran the update disc. Refer to “Updating your Wave
®
music system” on
page 7.
The system ejects the
update CD but does not
perform the update
Make sure you insert the update CD into the Wave
®
music system disc slot and not a
changer disc slot.
No sound or
sound is muffled
Make sure the Wave
®
Multi-CD Changer is plugged into a live power outlet and is turned on.
Check the connections between the Wave
®
music system and the changer. Refer to “Con-
necting the Multi-CD Changer to your Wave
®
music system” on page 6.
CD skips Make sure the system is not getting bumped in its current location. If so, move it to a more
protected location.
Check the CD for smudges or dirt. If cleaning is necessary, wipe the CD straight out from
the center (NOT in a circular motion) to clean it.
CD does not play Make sure there is a CD in the selected CD slot.
Make sure CD is selected on the display of the Wave
®
music system.
A CD is playing, but none
of the Multi-CD Changer
LEDs are lit
Check to see if the CD slot in the Wave
®
music system is selected, instead of a slot in the
Multi-CD Changer.
No sound heard from the
AUX device
Make sure the RCA plugs on the stereo cable are pushed in as far as they can go.
Press AUX on the remote and select the AUX input used by the device (AUX 1 or AUX 2).
Make sure the AUX device is turned on.
Customer Support
For additional help in solving problems, contact Bose
®
Customer Support. Refer to the
address list on the inside back cover of this guide.