Bose 20 CD Player User Manual


 
AM178934_09_V.pdf October 29, 2001 19
English
Using two listening zones
The Lifestyle
®
20 music system can direct sound from one or two sound sources to two
different listening areas at the same time. Each listening area, whether a room or a group of
rooms (including outdoor areas), is referred to as a zone. By adding powered speakers and
a second remote, you can establish two listening zones.
How zones work
Zones 1 and 2 can play different sound sources at the same time CD, AM/FM tuner,
TAPE, VIDEO sound, or AUX.
Both zones can listen to the same sound source at the same time.
Only one radio station can be played at a time.
Setting up two zones
The Lifestyle
®
20 powered speakers are set up in zone 1.
Any combination of rooms and floors in your home can be set up as zones.
Use a Lifestyle
®
20 system cable to connect a second Bose
®
powered speaker system
to the SPEAKERS ZONE 2 jack on the back of the music center.
You can also use special adapters to connect an existing stereo system.
Use a second Lifestyle
®
system remote control to operate zone 2.
See your dealer or contact Bose for information on obtaining additional powered speakers,
remote controls, and adapters for connecting additional equipment.
Setting a second remote for zone 2
You need a second remote control, set to ZONE 2, to operate speakers connected to the
ZONE 2 output.
To set your second remote to control speakers in the second zone, follow these steps:
1. Open the remote control battery cover.
2. Locate miniature switch 8 (Figure 26). If it is set down for ZONE 1, slide it up for ZONE
2, using a paper clip, ballpoint pen, or similar object.
3. Make sure the house code switches (1, 2, 3, and 4) match those on your first remote.
(See page 21 for more information on house codes.)
4. Replace the battery cover.
Operating Your Lifestyle
®
20 Music System
Figure 25
Example of two listening zones: the
Lifestyle
®
20 speakers in zone 1
(living room) and powered speaker
system in zone 2 (bedroom)
Bedroom
Zone 2
Living
room
Zone 1
Figure 26
Speaker code switch settings
ZONE 1 – switch 8 down
234l
ON
5678
K
40
ZONE 2 – switch 8 up
234l
ON
5678
K
40
Zone 1 remote
Zone 2 remote