Bogen rpk88 Stereo System User Manual


  Open as PDF
of 2
 
© 2005 Bogen Communications,Inc.
All rights reserved.
Specifications subject to change without notice.
54-2146-01A 0601
RPK88 Rack Mount Kit
Installation and Use Manual
The RPK88 Rack Mount Kit is designed to flush mount the components of a PCM system.The RPK88 will hold up to ten
modules in two assemblies.The RPK88 allows easy mounting of these modules in a standard 19-inch audio rack.The kit
includes twelve wiring saddles, eight mounting brackets, and eight #6 x 1/4” screws
.
RPK88 Mounting Plate
Mounting
Brackets (8)
Wiring
Saddles (12)
Knock-out panels (nine total)
START HERE
(Panel left open)
Knock-out panel for power supply
power cord (as needed, two total)
Knock-out panels for wiring
access (as needed, six total)
Remove additional panels to fit
assembled PCM system (beginning
here, then work left to right)
Plug wiring saddles into any of
12 staggered holes as needed
Remove appropriate knock-
out panels.
Six
Modules
Max.
Four
Modules
Max.
#6 x 1/4”
Screws (8)
3
3
2
2
1
1
2
3
Attach mounting brackets
to top and bottom corners
of module assembly.
Use screws included with
modules.
Attach module assembly
to RPK88 using #6 x 1/4”
screws.
See PCM system instructions
for module assembly.