Filter
Top Products
87
Troubleshooting
As new phones and Bluetooth
®
devices are released at
an increasing rate, there may be updated pairing and
operational instructions available online for your
particular device. For additional instructions or
instructions for new devices, please visit
www.fellowes.com/techsupport/bluetooth.aspx.
To view an interactive list of FAQs (Frequently Asked
Questions) and suggestions for troubleshooting, please
visit www.fellowes.com/bluetooth. If you still have
trouble with your device, please contact us directly at
www.fellowes.com/techsupport/bluetooth.aspx
or by dialing U.S. Customer Service at 1.800.945.4545
or European Customer Service at 008.001.810.1810.
Guidelines for Safe, Efficient Use
Clean earpiece with a damp, soft cloth. Other cleaners
may damage headset and void warranty. Keep headset
away from extreme temperatures, water, exceptionally
humid or dusty environments, open flame or fire. Do
not dismantle or attempt to repair headset. If headset
fails, return it to place of purchase for repair. Do not
drop headset or expose it to severe physical shock or
vibration. Do not attempt to ‘pair’ headset to your
phone while driving. Keep headset and other small parts
away from children.
Limited Warranty
Fellowes warrants this product to be free from defects in
manufacturing for one year from the date of original
retail purchase. This warranty extends only to the
original retail purchaser, and does not apply if the
product has been damaged or fails to function properly
as a result of misuse, abuse, alteration, or improper
cleaning or maintenance. ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE ARE LIMITED IN DURATION TO ONE YEAR
FROM THE DATE OF ORIGINAL RETAIL PURCHASE.
Fellowes’ sole obligation under this warranty or any
implied warranty, and the purchaser’s sole remedy, is
limited to the repair or replacement, at Fellowes’ option,
of the product or any defective part. IN NO EVENT SHALL
FELLOWES, ITS AFFILIATES, SUBSIDIARIES, RELATED
ENTITIES OR THEIR RESPECTIVE OFFICERS, DIRECTORS,
OR EMPLOYEES, BE LIABLE FOR INCIDENTAL,
CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR SPECIAL
DAMAGES. To make a claim write to WARRANTY CLAIMS,
Fellowes, Inc., 1789 Norwood Ave., Itasca, IL, 60143.
2. Voice Dialing: If your phone includes a voice
dialing mode, you can place calls with voice
commands. Make sure the phone and the headset
are on and within range of each other. Press the
Answer/End button on the headset once, then when
prompted, voice dial as you normally would. Please
refer to your phone’s owners manual for more
information on voice dialing.
PLEASE NOTE: The LED Indicator Light flashes green
once every second during calls to indicate phone
communication.
Answering/Rejecting a Call
To Answer a Call
When the phone rings or when you hear your phone
ring through the earpiece, press the Answer/End button
once. End the call by pressing the Answer/End button
again, or the appropriate key on your phone.
To Reject a Call
When the phone rings or when you hear your phone
ring through the earpiece, press and hold the
Answer/End button until the phone or the headset stops
ringing.
To End a Call
When you want to end a call, press the Answer/End
button once. When the phone is dialing, you can also
press the Answer/End button once to cancel the dialing.
To Use Call Waiting
(If your phone supports this function) When you hear
the Call Waiting signal in the earpiece, double-click the
Answer/End button to switch to the new call. Double
clicking the Answer/End button enables you to toggle
between calls, but you must use your phone’s keypad to
end either call. Refer to your phone’s owners manual for
details on handling multiple calls simultaneously.
To Put a Call on Hold
(If your phone supports this function) When you are on
a call and want to put the caller on hold, double-click the
Answer/End button.
Transferring Sound from Phone to Headset
If you initiate a call without using the headset, you can
transfer the call to the headset if it is paired with the
phone and within range. While the call is in progress,
turn on your headset and press the Answer/End button
once to transfer the call sound.
Last Number Redial
(If your phone supports this function) To redial the last
number you called, double-click the Answer/End button.
Headset must be in standby mode. Redial will not work
while you are on a call.
To Reset the Headset
Switch off the headset. Press and hold the Answer/End
button, while sliding and holding the Volume Switch up
for 7 seconds.