Filter
Top Products
5
Spark Digital Controls
All of Spark Digital’s advanced features are controlled with just two knobs: the large Control Knob at the front of the
microphone and the Focus Control toggle switch at the rear.
Control Knob
The Control Knob allows adjustment of headphone volume, microphone gain (sensitivity), and microphone mute. The
status LEDs at the front of the microphone will light and change color to indicate the selected function and level.
Headphone volume: By default, the status and level lights will illuminate blue, indicating the knob is controlling headphone
volume. Rotate the knob clockwise to increase headphone volume and counter-clockwise to decrease — additional status
lights will illuminate as the level is increased, or turn off as the level is decreased. Each time the microphone is unplugged
the headphone volume level will be restored to a moderate level.
Microphone gain: To access the controls for microphone gain, depress the Control Knob for 3 seconds. The status light
and level indicator lights will switch from blue to orange. To increase the gain (sensitivity) of Spark Digital, turn the knob
clockwise, and turn counterclockwise to reduce the gain (sensitivity). The orange level indicator lights will light to indicate
the increase or decrease in microphone gain.
To exit gain adjustment mode and return to headphone volume adjustment, simply depress the Control knob again for 3
seconds. The indicator lights will return to blue.
Muting: To mute the microphone, briefly depress or tap the control knob. The status light will flash to indicate that
microphone muting is engaged. To un-mute the microphone, simply tap the control knob again.
1
2
3
4
5 5
6
7
Microphone
(address side)
Status Light
Level Indicator Lights
Shockmount Stand
Angle Adjustment Knobs
1
2
3
4
5
Rotating Ring
Cable receptacle for
USB connector,
Lightning connector,
headphone output
6
7
2