Filter
Top Products
ENGLISH
E-4
Seek Tuning
1. Press the
AM
or
FM
to select the desired band.
FM I ➜ FM II ➜ FM III
or
AM I ➜ AM II
2. Press the or to tune in stations. Seek tuning auto-
matically stops at a broadcasted frequency.
When tuning to FM stereo broadcasting stations, the
“
” stereo indicator will light up in the display window.
Manual Tuning
1. Press the
AM
or
FM
to select the desired band.
2. Press the or and hold for more than 0.5 second
to activate the manual tuning mode. Press again to tune in
to stations.
After 4 seconds duration of completing Manual Tuning, the
tuning control will revert to the Seek Tuning mode.
Scan Tuning
1. Press the
AM
or
FM
to select the desired radio band.
2. Press the .
The unit will scan the selected radio band for stations.
Press the
again to stop Scan Tuning and remain on
this selected frequency.
Tips
When tuned in to broadcasting stations, the antenna indicator
on the display window is lit.
Preset Scan Tuning
1. Press the
AM
or
FM
to select the desired radio band.
2. Press the .
The unit will scan preset memory for the 12 stations from
the AM I/AM II band or the 18 stations from the FM I or FM
II and FM III bands. The unit will stop at each preset sta-
tion for 8 seconds, before continuing to the next preset sta-
tion.
Press the
again to stop Preset Scan Tuning and re-
main this on the selected frequency.
Memorizing Stations Automatically (Travel Store)
1. Press the
AM
or
FM
to select the desired band.
2. Hold the
AM
or
FM
pressed for longer than 2 seconds.
Up to 6 stations with strong signals will be automatically
stored in preset memory for the selected band.
Note
This function is available for FM
III
and AM
II
.
Memorizing Only the Desired Stations
A total of 30 stations (18 for the FM I, FM II and FM III, 12 for
AM I and AM II) can be stored in preset memory.
1. Press the
AM
or
FM
to select the desired radio band.
2. Press the or to tune in stations.
3. Press and hold the desired preset memory button
1
-
6/
for about 2 seconds until the frequency indicator
flashes twice.
The number of the pressed preset memory button appears
on the display window.
Note
If/when you store another station on the same preset number
button, the previously stored station is replaced with new one.
Receiving the Memorized Stations
1. Press the
AM
or
FM
to select the desired radio band.
2. Press the
1
-
6/
momentarily.
Local/Distant (LO/DX) Selection
This feature is used to select the strength of the signals at which
the radio will stop during Seek Tuning.
Press the
LD/SENS
for more than 2 seconds to select the Local
setting and only the strongest (local) stations will be received.
The “lo” indicator appears in the display window.
Pressing again for 2 seconds will select the Distant setting and
the radio will stop at a wider range of signals, including weaker
more distant stations. The “lo” indicator will go out on the dis-
play window.
The “Distant” setting is the recommended default mode of re-
ception.
Radio Reception
RPD540_p.1-9 (E) 9/9/99, 3:23 PM4