Filter
Top Products
Basic Operations
13
Set Serial Baud Rate
Measurement data can be transferred between the AT-400
and a personal computer using the serial port and optional
interface software. The data can then be used for analysis,
printed, or stored.
The data transfer rate (baud rate) between the Antenna
Tester and computer must be identical and set to 9600. To
change the baud rate for the serial port on the Antenna
Tester, follow the steps below.
Complete interface software instructions are included with
the software.
y Press the MENU key.
y Press the UTIL key.
y Press the SERIAL key.
y Repeatedly press the SERIAL key until the 9600 is
displayed.