Beyerdynamic MCS-D 200 Speaker System User Manual


 
MCS-D 202 Interpreter Station
E
69
How to set the ID
The “SET ID” line is displayed.
By using the PRE-SELECT buttons you can change the BOOTH ID and the DEVICE ID as described below:
1. BOOTH ID: press left/right relay channel PRE SELECT button
2. DEVICE ID: press left/right output channel PRE SELECT button
How to save the ID
Press the MUTE button. The interpreter station ID is saved. The ID is shown on the left display.
How to exit the ID mode
Press the MENU button to exit the mode. The ID of the intepreter station is not displayed any more.
Station ID= BOOTH-ID + DEVICE-ID
1. Change BOOTH ID 2. Change DEVICE ID Exit
Save