Beyerdynamic MCS-D 200 Speaker System User Manual


 
Introduction
E
06
Thank you for selecting the digital multimedia-based MCS-D 200 conference system from beyerdynamic. Please take some time
to read carefully through this manual before setting up the equipment.
This manual describes the installation and operation of the MCS-D 200 system without the control and configuration via PC.
MCS-D 200 is a fully digital multimedia-based conference system in single-cable design. It can be used for small and large
events in permanent installations or for mobile use.
The system includes the following components:
• MCS-D 200 Control Unit
• MCS-D 2073 Delegate / Chairman Station
• MCS-D 202 Interpreter Stations
• MCS-D 3121 Delegate Station and MCS-D 3123 Chairman Station
• MCS-D 3171 Delegate Station and MCS-D 3173 Chairman Station
• Cabling via “NetRateBus”
The NetRateBus is a special kind of cabling which allows operating all services such as microphone channels, interpreting
channels, control, network, telephone and safety precautions simultaneously on 54 channels without any interferences.
The NetRateBus allows different types of cabling such as in a daisy chain, star or tree structure with any branch. The setup is
clear and simple.
One conference system can consist of a maximum of 1,400 microphone units.
For the digital interpreter stations there is no additional control unit needed.
Third party devices such as PCs, automatic cameras with pan, tilt, zoom, recording devices, output devices or display screen in
the hall can be connected.
With the MultiSession Management several meetings can be controlled simultanously with one control unit and the software.
The individual conference rooms can be combined to one large group or conference room by changing the software settings
accordingly.