Beyerdynamic MCS-D 200 Speaker System User Manual


 
MCS-D 2073 Microphone Station
E
53
7.1.10 MCS-D 2073 as chairman station
Each MCS-D 2073 microphone station can be configured as a chairman station via the MCS-D 200 control unit. Refer also to
chapter 3.3.4.3 “President(s)“.
Note:
Whenever the MENU button is activated, the PRIOR and CANCEL buttons cannot be enabled. When the MENU button is
deactivated, the PRIOR and CANCEL buttons can be enabled once again.
The chairman can control the discussion with the following function buttons:
PRIOR.
The PRIOR button only works when the microphone station has been configured as a chairman station via the
MCS-D 200 control unit. If the MENU button is activated its function is not available.
Hold down the PRIOR button for a short interruption or announcement. If your microphone was not yet activated it will be
turned on by pressing the PRIOR button. All turned on microphones remain muted with a flashing LED ring as long as you hold
down the PRIOR button.
Chairmen of a higher level can mute all delegate microphones and chairman microphones of a lower level by holding down
the PRIOR button.
CANCEL
The CANCEL button only works when the microphone station has been configured as a chairman station via the
MCS-D 200 control unit. If the MENU button is activated its function is not available.
Press briefly (< 1s): The microphones of all speakers are turned off simultaneously; registered requests-to-speak are not cleared.
Hold down (> 1s): The microphones of all speakers are turned off simultaneously; registered requests-to-speak are cleared.
This applies for all operating modes.
PREVIOUS
The PREVIOUS button only works when the microphone station has been configured as a chairman station via the
MCS-D 200 control unit. When a speaker turns off his microphone, the chairman can ask him to speak once again
by pressing the PREVIOUS button. The speaker does not need to register a request-to-speak and answer a query
directly.
The chairman can ask the previous speaker to speak once again as described in the following:
Press briefly (< 1s): The microphone of the previous speaker is turned on again; the microphone of the current speaker is
turned into the request mode.
Hold down (> 1s): The microphone of the previous speaker is turned on again; the microphone of the current speaker is not
turned off.
NEXT
The NEXT button only works when the microphone station has been configured as a chairman station via the
MCS-D 200 control unit.
The chairman can ask the next speaker to speak as described in the following:
Press briefly (< 1s): The microphone of the next speaker is turned on, the microphone which has been turned on the longest
time is turned off (first in-first out).
Hold down (> 1s): The microphone of the next speaker is turned on, the microphone which has been turned on the longest
time is not turned off.
How to turn the podium microphone station on or off
Each chairman can turn on or off a podium microphone station (ID #1999, #2000) with the function button 5 of his
chairman station. The LED will illuminate when the microphone is turned on.
# 1999: The podium microphone station is turned on or off by pressing the function button 5 .
# 2000: The podium microphone station is turned on or off by pressing the function button 5 , but it can also be turned on
when pressing the microphone button of the podium station.
15
15
15