Filter
Top Products
MCS-D 2073 Microphone Station
E
47
Microphone socket. Make sure that the microphone is connected properly and tightly.
Loudspeaker. The original sound of the conference is transmitted via the two loudspeakers. When the microphone is
activated, the loudspeaker of the microphone station is turned off automatically.
Headphone socket (3.5 mm TRS jack) on the right and left hand side (optional with a 2nd language selector). Connect a
headphone to listen to the original sound or an available language channel via headphones. You can also connect a tape
recorder to this socket.
Microphone to turn on the microphone or to register a request-to-speak in the system.
Buttons to set the volume of the headphone, with autorepeat function. The setting (between 0 and 63) is displayed. The
settings are still stored when the system is turned off.
Important: Make sure that the MENU button is not activated when you set the volume. If the MENU button is activated
these buttons act as navigator buttons.
Language/channel selector buttons (up / down) on the right and left hand side with autorepeat function. Use the Channel
Up and Channel Down buttons to select a language channel, the original channel (OR) or any other available information,
audio or music channel, which is to be transmitted to the connected headphone.
Important: Make sure that the MENU button is not activated when setting the volume. If the MENU button is activated,
these buttons act as navigator buttons.
The list of channels is displayed. The language channels are encoded according to the international MARC language codes.
Voting button for electronic votings (only when using the iCNS software)
Menu buttons (ENTER, MENU, EXIT)
Navigator buttons (left, right, up, down)
Display
Priority button (only when microphone station is configured as chairman station)
Cancel button (only when microphone station is configured as chairman station)
Function button 9 to activate the microphone of the previous speaker again (only when microphone station is configured
as chairman station)
Function button 0 to activate the next request-to-speak (only when microphone station is configured as chairman station)
Function button 5 to turn on podium microphone stations with the ID # 1999 or 2000 (only when microphone station is
configured as chairman station). LED will illuminate, when the microphone station is activated via the function button 5.
Chip card reader (only possible when using the iCNS software)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16