Filter
Top Products
MCS-D 200 Control Unit
E
37
3.3.10.1 Ext. DAI ID List
In the Ext. DAI ID LIST menu you may enter a device identification number (logical address) for every interface unit (=EXTERNAL
DAI), that is an interface unit with 2 CH IN and 2 CH OUT each. Each interface unit is regarded as an independent device, even
if there is a maximum of 3 interface units in the same 19" housing of one DAI. The interface units are recognised when the
system is started.
The identification number of the internal D/A interface of the MCS-D 200 control unit (=INTERNAL DAI) is fixed [=00] and
cannot be changed.
3.3.10.2 DAI Set-up
In the DAI SETUP menu you may assign channels to the LINE INPUTS and LINE OUTPUTS of the internal and external DAIs.
The DAI SETUP menu includes a list of the internal D/A interfaces of the MCS-D 200 control unit [=00] and all external DAI
units; each with its ID number that has been set in the EXT. DAI ID LIST menu.
The identification number of the internal DAI of the MCS-D 200 control unit is fixed and cannot be changed.
Use the up or down navigator button to scroll through the list. Use the ENTER button to select a DAI for assigning channels.
The LED on the front of the DAI interface will illuminate for the selected D/A unit.
Use the up or down navigator button
for scrolling
Use the right or left hand
navigator button to enter the
new ID number!
press the ENTER button
press the SET ID button to confirm
EXTERNAL DAI 1 (of 3 DAIs); the appropriate
LED will illuminate on the front of the DAI
Hash indicates that the ID number has
been already assigned to another device.
Select a different number!
press the ENTER button
Internal DAI [=00] of the control unit
Use the up or down button for
scrolling