Beyerdynamic MCS-D 200 Speaker System User Manual


 
MCS-D 200 Control Unit
E
34
3.3.8.1 Interpreter ID List
You may select an individual device and assign a booth in combination with a device dentification number (DEVICE ID). Also
refer to chapter 3.3.8.2 “Set Interpreter IDs” to find out how you can assign identification numbers to all interpreter stations.
Go to the “Booth” line and enter the booth number. Then use the down navigator button to go to the “Device ID” line. The
LED ring of the selected microphone station will illuminate (here: microphone station 1 out of 2).
Use the right or left hand navigator button to enter a device ID number (1 to 2000). If you select an ID number which has been
already assigned, hash will be diplayed. In this case select a different number to avoid conflicts.
The same ID number can be assigned to interpreter stations in different booths.
Example:
Booth 0001: Interpreter station no. 0001, 0002;
Booth 0002: Interpreter station no. 0001, 0002.
Select the next interpreter station, and so on.
3.3.8.2 Set Interpreter IDs
With this function you can assign device IDs to all microphone stations in one booth by pressing the MIC button of the
microphone stations one after another.
Note: You can directly assign IDs to the MCS-D 202 interpreter station. Refer also to chapter 7.2.7 “How to assign an ID to the
interpreter station”.
Use the up or down navigator
button for scrolling
Use the right or left hand
navigator button to change
the number
Booth number
Device identification number (ID)
Hash indicates that the ID number has been
already assigned to another device. Select a
different number!
Press the SET ID button if the device has the
desired number.
press the ENTER button
press the ENTER button
Use the up or down navigator button for
scrolling
Use the right or left hand navigator button
to enter the first ID number!
Booth number
Device ID number