Filter
Top Products
MCS-D 200 Control Unit
E
22
3.3.4.3 President(s)
In the PRESIDENTS menu you can assign the functions of a chairman station such as CANCEL, PRIORITY, PREVIOUS or NEXT to
any microphone station in the selected session (here: session 01).
The following items refer to chairman stations:
• Each chairman can turn on his microphone at any time, regardless of the selected limit.
• Any number of microphone stations can be programmed as chairman stations.
• Chairman stations can be assigned to different levels (0-99), each level with any number of chairman stations.
• By using the PRIORITY button the chairmen of a higher level can mute all microphones of the delegate stations and the
chairman stations of a lower level.
• Chairman stations of the same level, however, cannot be muted by using the PRIORITY button.
• Depending on the operating mode, all chairmen can turn off the microphones of all delegate stations by using the CANCEL
button.
• By using the NEXT button chairman can release requests to speak and by using the PREVIOUS button they can ask previous
speakers to speak once again.
How to program Chairman Stations (SET/RESET)
Each delegate station features a device ID number (refer to chapter 3.3.7 “Delegate IDs” and 3.3.7.2 “Set IDs”). Use the up or
down navigator button to scroll to the microphone station with the appropriate ID which is to be programmed as a chairman
station. The arrow indicates the selected microphone station. Then press the SET button to assign the functions of a chairman
station to this microphone station. In this way you can program any number of microphone stations as chairman stations. The
star in brackets identifies all chairman stations.
If you would like to cancel the chairman functions of a microphone station, use the up or down navigator button to scroll to
the microphone station with the appropriate ID. The arrow indicates the selected microphone station. Press the RESET button
to cancel the chairman functions of the selected microphone station. The star is removed.
Press the EXIT button when all chairman stations are determined. In the PRIORITY LEVEL(S) menu you can then assign the
chairman stations to different levels.
press the ENTER button
The arrow indicates the active line.
press the ENTER button
The star indicates the chairman station
Session number
Device ID
Use the up or down navigator button to
scroll through the menu