Filter
Top Products
MCS-D 200 Control Unit
E
20
3.3.4.2 Channel List
In the menu CHANNEL LIST you can prepare and edit a list of all required channels. All channels have to be defined in the
menu DEFINE CHANNELS (refer also to the chapter 3.3.5 “Define Channels”), because the channel list is basing on the
predefined channels.
Whenever the delegate presses the language/channel selector button of his microphone station, the list is displayed.
The channel list includes the OR channel, language channels or other channels such as music channels.
For the interpreter stations you can select channels from this channel list.
In the menu CHANNEL LIST you can...
1. ...scroll through the channel list with all predefined channels of the whole system.
2. ...prepare a channel list for the selected session:
• select required channels (set/reset)
• name and number channels
Note: Channels are added by pressing the SET button. A channel description consists of a maximum of 3 characters. The
language channels are encoded according to the international MARC language code (refer to chapter 11. “List of Language
Codes”).
Use the up or down navigator buttons to scroll through the list of all predefined channels in the menu DEFINE CHANNEL. Press
the SET button to add a selected channel to the channel list. The star * identifies the selected channel.
When the NUM button is pressed the cursor goes to the channel number. Use the up or down navigator button to change the
number.
Use the up or down navigator
button for scrolling.
Press the SET button to add OR channel to the channel
list
Use the up or down navigator
button to change the channel
number
The star *
identifies
the selected
channel
Press the RESET button to remove
selected channel from the channel
list
Press the NUM button to change
the number
Press the NAME button to change the channel
description
Adapt the number and description for the MCS-D 2073
display