Filter
Top Products
©2009 BERNINA of America, Inc. jpl Page 1 of 3
Move the holly design
to the left of the place-
ment line the desired
distance.
Press M on the key-
board and measure
the length of the holly
design.
Measure the finished
length of the blouse
along the placket in mil-
limeters.
Holiday embroidery turns a plain sheer blouse into
something special. On sheer fabrics, it is a good
idea to reduce the density of the design. This is
easily done in the BERNINA Embroidery Software.
Open, airy, lightly-digitized are best; outline designs
are also good.
Preparing the Placket Design
Open the BERNINA Embroidery Software.
Right click on the Show Hoop icon and choose the
artista 400 x 150 Mega Hoop; make sure Display
Hoop and Show Grid are activated.
Select the Open Object tool and a Single outline.
Draw a placement line down the center of the Mega
hoop outline. This will be used to place the design
evenly along the placket edge.
Select File > Insert Design and choose HG045. Click
the Rotate icon two times.
Embroidered
Holiday Blouse
Created by Debbi Lashbrook
Sewing Equipment & Accessories
• BERNINA Embroidery Software
• BERNINA Sewing & Embroidery System
• Mega Hoop
• Large Oval Hoop
• Flat Bed Scanner
Embroidery Designs
• OESD’s Holiday Linens 2 Collection #12215,
• Designs HG045 and HG051
Notions & Blouse
• Isacord Embroidery Thread in desired colors
• AquaMesh Plus Wash-Away Stabilizer
• Organ Embroidery needle, size 65 or 70 Sharp
• EZ Glitzer and crystals
• Purchased Sheer Blouse
E
m
b
r
o
i
d
e
r
y
P
r
o
j
e
c
t
Supplies