Bel Canto Design CD-2 CD Player User Manual


 
page 8© 2007 bel canto design, Ltd. CD-2 User’s Guide 0607revA
CD-2 Remote Control Operation
The CD-2 Remote Control has a compre-
hensive set of control features that are
not available on the front panel control.
To access all CD-2 control features
press the button marked CD on the
remote control. e.One Dac or Preamp
functions can be controlled by selecting
DAC or PRE on the remote. The Main
CD controls will still operate in the DAC
and PRE modes.
Standby: Toggles the CD-2 into and
out of Standby.
Display: Toggles the Display on and
off. When in Off mode the Display will
come on momentarily when changing
the CD-2 operation.
Mute: When in variable output mode
this will toggle the analog outputs from
Soft to Hard Mute and Un-muted modes.
Soft mute is indicated by two decimal
points in the far right of the diaply . .
and Hard mute is indicated by 4 deci-
mals on the display . . . .
Pause ||: This toggles the Pause mode
on and off. The Mode Indicator will
show the pause or play mode as appro-
priate.
Stop: The solid square indicates Stop
and will place the CD-2 in Stop mode
when pressed. The CD-2 will remain on
the current track and re-start the track
when Play is pressed.
PLAY>: This button initiates playback of
the track that is displayed.
VOL>: This increases the volume setting
in Variable Output mode. It has no func-
tion in Fixed Output Mode. The display
will show the volume level while chang-
ing.
<VOL: This decreases the volume set-
ting in Variable Output mode. It has no
function in Fixed Output Mode. The dis-
play will show the volume level while
changing.
|<<: Track Decrement to reduce the
track number for playback.
>>|: Track Increment to increase the
track number for playback.
<<: To slow playback speed in real
time. Pressing twice will reduce speed
further, press Play to resume normal
playback.
>>: To increase playback speed in real
time. Pressing twice will increase speed
further, press Play to resume normal
playback.