Behringer EX2200 Speaker System User Manual


 
9
DUALFEX PRO EX2200
1.3.2 Surround Processor Section
87
Fig. 1.3: Controls of the surround processor section
7
With the SURROUND switch you can activate the surround processor section. Please note that this
switch has to be released if you want to process two separate input signals. Otherwise there will be
undesired cross-talk between the two channels.
8
The SURROUND control determines the effect of the surround processor. This function serves to
improve the intensity of the stereo effect and to enlarge the stereo basis dependent on the program
content. Therefore, this function can only be used in conjunction with stereo program material.
1.3.3 Rear Panel Control Elements of the DUALFEX PRO
11
13 12
10 9
Fig. 1.4: Control elements of the rear panel
9
SERIAL NUMBER. Please take the time to have the warranty card filled out completely and return it
within 14 days after the date of purchase, so as to be entitled to benefit from our extended warranty. Or
use our online registration option available on the World Wide Web under www.behringer.com.
10
FUSE HOLDER / VOLTAGE SELECTOR. Please make sure that your local voltage matches the
voltage indicated on the unit, before you attempt to connect and operate the DUALFEX PRO. Blown
fuses may only be replaced by fuses of the same type and rating.
11
MAINS CONNECTION. Use the enclosed power cord to connect the unit to the mains. Please also note
the instructions given in chapter 1.2 Before You Begin.
12
AUDIO IN. These are the audio inputs of your DUALFEX PRO, available both as balanced 6.3 mm jack
and RCA connectors.
13
AUDIO OUT. These are the audio outputs of your DUALFEX PRO. Matching phone jack and RCA
connectors are wired in parallel.
1. INTRODUCTION