Filter
Top Products
2
Avion
™
Home Theater Furniture
Your Avion
™
Home Theater Furniture
is engineered for easy assembly.
Carefully follow this procedure to pre-
vent any damage.
Placement and Maintenance
Avion
™
Home Theater Furniture is
designed for indoor use on level
floors. Clean glass with glass cleaner,
and steel parts and wood veneer with
a moist cloth.
Step 1
Avion Cabinet x 1
Metal Leg x 2
Adjustable Shelf x 2
Handle x 3
Handle Screw x 8
Unpack and identify the parts listed above.
The assembly workspace should be a non-marring surface such
as carpet. For missing hardware pieces, please contact BDI
Customer Service at: customerservice@bdiusa.com
For all other concerns please contact your local BDI Retailer.
Install legs.
First, remove all internal components from the
cabinet including shelves, hardware box, legs and extra glass
insert. Carefully tip cabinet onto its back (Step 1). Install
metal legs to the bottom of the cabinet using the flat head
screw and large allen wrench.
*Note: Each of the metal legs have adjustable
levelers that can be adjusted from inside the cabinet.
For more information about the adjustable levelers and troubleshooting
assembly, be sure to check out “Fine tuning your new BDI Avion Home
Theater Furniture” at the end of these instructions.
Designed by BDI Design Studio.
‘Avion’ is a trademark of Becker
Designed, Inc. All rights reserved.
©2007 Becker Designed, Inc.
Large/Small Hex Wrench
Sliding Back Panel x 2
www.bdiusa.com
customerservice@bdiusa.com
Machine Screw x 8
Phillips Screwdriver