Filter
Top Products
DM630i
Floor-standing loudspeaker system
Product Summary
●
Designed with the more demanding digital sources of the nineties in mind, the 600 series has
earned a reputation for minimal coloration and musical accuracy in audio reproduction.
Successfully capturing the transients found in music meant developing a loudspeaker able to
do justice to the attack of the original audio signal.
Designed by a master of industrial design Dr Kenneth Grange, the cool, dark lines of the
600 series cabinet are perfect partner for contemporary furniture and interior design settings.
●
The DM630 delivers a more profound bass delivery via the larger 52-litre enclosure.
●
The high excursions needed to extend the low frequency range to 40Hz are provided by two
active 8in bass units which enable higher system power handling by sharing the LF load
●
The bass is augmented by a rear facing port with a range of port lengths to allow for bass
response adjustment of the system to reflect the listeners taste.
Technical highlights
●
B&W's Tweeter technology ensures that the sound remains focused and time sensitive and
that the stereo image is presented with unparalleled three dimensional accuracy.
●
The strict acoustic requirements of the cabinet have dictated a front baffle moulding of extra
high rigidity. The polymer has been chosen for its composition and ability to reduce unwanted
resonances to a minimum.
B&W Loudspeakers Ltd reserves the right to amend details of the specifications without notice in line with technical developments. E & OE. All trademarks acknowledged.
www.bwspeakers.com
Description
Drive Units
2
1
/
2
-way 4th-order, variable port, bass
reflex digital monitor system with bi-wiring
1 x 26mm high frequency with metal
dome, high temperature voice coil and
fluid cooling
2 x 200mm bass/midrange with rigid
die-cast chassis, co-moulded reinforced
polypropylene cone/low-hysteresis
rubber surround assembly and 31mm
high temperature voice coil on Kapton®
former
Frequency Response
Sensitivity
Nominal Impedance
Power Handling
Dimensions
Finish
53Hz – 20kHz ± 2dB on reference
axis
91dB spl(2.83V 1m)
4 ohms
30W – 200W into 4 ohms on
unclipped programme
Height: 850mm Width: 236mm
Depth: 407mm
Black Zelda